Call 24/7, we answer day or night. (516) 823-2123

Mold Removal & Water Damage Services in Inwood, NY 11096

Inwood Mold Solutions offers 12 mold and water damage services for homes and businesses in Inwood, NY 11096 and the Five Towns: mold remediation, black mold removal, basement, crawl space, attic, bathroom and kitchen mold removal, water damage restoration, flood mold cleanup, HVAC and duct mold, mold assessment and testing coordination, and commercial mold remediation. Every one of them starts the same way: finding the water behind the mold.

Not sure which service you need? You don’t have to know. Call, tell us what you’re seeing, and we’ll point you to the right one.

  • Call 24/7
  • 24/7 emergency water response
  • Same-day appointments
  • Mold & water damage only
Technician cleaning a bathroom ceiling after mold treatment

Mold Remediation Services by Area of the Home

Mold shows up where water collects, and in Inwood that’s usually low and hidden: basements, crawl spaces and wall cavities, plus attics and bathrooms where moist air gets trapped.

Mold Remediation

The complete process for mold beyond a small surface spot, from moisture source to independent clearance.

Common signs: Spreading growth, musty smell, mold that returns after cleaning

What’s involved: Moisture source, assessment, containment, removal, drying, clearance

Black Mold Removal

Dark mold handled based on how far it has spread and what’s feeding it, not on scary color labels.

Common signs: Black or dark green patches on walls, ceilings, grout or wood

What’s involved: Same full process; porous materials removed, solid surfaces cleaned

Basement Mold Removal

Our most common call in Inwood: finished basements, block and stone walls, lower-level dens and stored belongings.

Common signs: Musty lower level, damp slab, white streaks, mold on boxes and baseboards

What’s involved: Moisture readings, containment, drywall and carpet removal, drying, dehumidification

Crawl Space Mold Removal

Damp crawl spaces under older homes and raised ranches, where ground and tide moisture rise into the framing.

Common signs: Musty floors above, damp soil, mold on joists

What’s involved: Cleaning framing, vapor barrier, ventilation or dehumidification

Attic Mold Removal

Mold on roof sheathing and rafters, usually from poor ventilation, a bath fan venting into the attic or a winter ice dam.

Common signs: Dark staining on roof boards, frost on nails in winter, musty upstairs

What’s involved: Cleaning sheathing, fixing venting and fan ducts

Bathroom Mold Removal

More than grout: leaks behind tile, ceilings above showers and fans that don’t actually move air outside.

Common signs: Spots on the ceiling, soft drywall, mold that returns after cleaning

What’s involved: Checking behind tile and ceilings, fan venting, removal of damaged drywall

Kitchen Mold Removal

Under-sink leaks, dishwasher and refrigerator water lines, and particleboard cabinets that swell and hold moisture.

Common signs: Musty sink base, warped cabinet floors, stains near appliances

What’s involved: Finding the leak, removing damaged cabinet parts and drywall, drying

HVAC & Duct Mold

Musty air from vents, AC drain pans and air handlers, with an honest answer when duct cleaning isn’t the fix.

Common signs: Musty smell when the AC runs, visible growth at vents or the drain pan

What’s involved: Inspecting the system, cleaning components, fixing condensation sources

Commercial Mold Remediation

Storefronts and restaurants on Rockaway Turnpike, units off Inip Drive, multifamily buildings and community spaces.

Common signs: Tenant or customer complaints, leaks between units, inspection findings

What’s involved: Scheduling around business hours, containment, documentation

Water Damage & Flood Services, With 24/7 Emergency Response

Most mold in Inwood starts as a water problem. The EPA advises drying wet materials within 24 to 48 hours to prevent mold, which is why our phone is answered around the clock and emergency response for active water is available 24/7.

Water Damage Restoration

Burst pipes, water heater failures and appliance leaks, dried fast so a water problem doesn’t become a mold problem.

Common signs: Wet drywall or flooring, ceiling drips, swelling baseboards

What’s involved: Stopping the source, extraction, drying, moisture readings

Flood Mold Cleanup

High-tide flooding, storm surge and sewer backups on Inwood’s low-lying streets.

Common signs: Water through foundations or floor drains, sewage odor, soaked carpet and drywall

What’s involved: Treating floodwater as contaminated, removing soaked materials, drying

Why is floodwater handled differently from a pipe leak?

Water from outside flooding or a sewer backup can carry sewage and is treated as grossly contaminated (Category 3 under IICRC water damage standards). Soaked drywall, insulation and carpet are removed instead of dried in place.

Section of drywall cut open to check for hidden mold
Opening a small section of drywall shows whether moisture and mold reached the wall cavity.

Mold Assessment & Testing Coordination

For mold larger than 10 square feet, New York Labor Law Article 32 requires a licensed mold assessor to inspect the property and write a remediation plan, and that assessor must be a separate company from the one doing the removal. We coordinate with independent assessors for the plan and for the clearance test after the work, so the person judging the job isn’t the person selling it.

Mold assessment and testing in Inwood covers when testing helps, when it doesn’t, and what the assessor checks.

When you probably don’t need a test

A small visible spot on a hard surface, under about 10 square feet, with a known cause (like shower moisture) usually doesn’t need lab testing. Fixing the moisture and cleaning it properly matters more.

Every service follows the same 8 steps

  1. A quick call
  2. Find the moisture source
  3. Independent assessment and plan
  4. Containment
  5. Removal and cleaning
  6. Drying
  7. Independent clearance
  8. Keep the water out

Steps 3 and 7 apply to jobs over 10 square feet.

Which Mold Service Do You Need? Start With What You’re Seeing

What you’re noticingMost likely serviceFirst thing to do
Musty smell in the basement, nothing visibleBasement mold removal, often with an assessmentDon’t run fans across the area; call to describe the smell and when it started
Water came in after a high tide or stormFlood mold cleanupPhotograph everything, start drying, call right away
Burst pipe or appliance leakWater damage restorationShut off the water, move valuables, call any hour
Dark spots on a bathroom ceilingBathroom mold removalCheck whether the fan vents outside; small spots may be a DIY fix
Stained roof boards in the atticAttic mold removalLook for a bath fan duct ending in the attic or signs of ice dams
Musty air when the AC runsHVAC and duct moldCheck the drain pan and filter; avoid running the system if growth is visible
Mold that came back after someone else’s jobMold remediation, starting with the moisture sourceGather the old paperwork and photos before the call
Inspection report flagged mold before a closingAssessment coordination plus remediationSend the inspection report so the scope is clear

Why These Services Matter More in Inwood

Tide water on low streets

Residents along Bayswater Boulevard, Davis Avenue, Chestnut, Maple and Walnut roads and Peppe Drive have described flooding at full-moon high tides. Repeated water against foundations keeps basements and crawl spaces damp.

Sandy’s hidden damage

During Hurricane Sandy in 2012, the USGS gauge on Jamaica Bay at Inwood recorded a record water level above FEMA’s 100-year flood elevation. Homes that were pumped out but never dried can still hide damage in framing and subfloors.

Storms keep coming

Parts of Long Island got up to 9 inches of rain in September 2023, and Nassau County and the Town of Hempstead declared states of emergency ahead of flooding in July 2026.

Older houses

Many Inwood homes date to the 1910s and 1920s, with stone or block foundations that wick moisture into basements.

Finished lower levels

Hi-ranches and raised ranches often have finished rooms close to grade, where slabs sweat and drywall hides growth.

Humid summers

The EPA recommends indoor humidity below 60%, ideally 30–50%. Closed-up basements near the bay often sit above that in July and August.

What Every Inwood Mold Solutions Service Includes

  • A real conversation first. If a spot is small enough to clean yourself, we’ll say so.
  • Moisture source found and addressed, because mold always follows water.
  • Assessment kept separate from removal on jobs over 10 square feet, as New York requires.
  • Containment under negative air with HEPA filtration.
  • Moldy porous materials removed, not sprayed and painted over.
  • Drying measured before anything is closed up.
  • Documentation with photos, moisture readings and clearance paperwork for insurance or a future sale.

Inwood Mold Solutions connects Inwood and South Shore homeowners with licensed, insured mold and water damage professionals who perform the on-site work.

Who we work with

  • Flood-zone homeowners
  • Finished-basement families
  • Two-family owners & landlords
  • Renters
  • Buyers, sellers & agents
  • Property managers
  • Restaurants & retail
  • Schools & houses of worship

Where we work

Inwood (11096), Lawrence (11559), Cedarhurst (11516), Woodmere (11598), Hewlett (11557), North Woodmere (11581), Far Rockaway (11691), Atlantic Beach (11509), Long Beach (11561), Island Park (11558), Valley Stream (11580), plus Oceanside, East Rockaway, Lynbrook and Rosedale.

When you can reach us

Phone answered 24/7. Emergency response 24/7 for active leaks, flooding and sewer backups. Same-day appointments for mold inspections and remediation when available.

Mold Removal Services FAQ

What mold services do you offer in Inwood, NY?

Mold remediation, black mold removal, basement, crawl space, attic, bathroom and kitchen mold removal, water damage restoration, flood mold cleanup, HVAC and duct mold, mold assessment and testing coordination, and commercial mold remediation.

What is the difference between mold removal and mold remediation?

People use them interchangeably. Remediation is the more accurate term: it means removing the mold, fixing the moisture that caused it, and confirming the area is back to normal, not just wiping away what you can see.

Do you handle water damage without visible mold?

Yes. Fast drying after a pipe burst, appliance leak or flood is the best way to prevent mold. Emergency response for active water is available 24/7.

Do I need mold testing before you start?

For mold over 10 square feet, New York requires a licensed assessor to write a remediation plan before work begins. For small visible spots with a known cause, testing usually isn’t needed.

Can you remove mold the same day?

Many inspections can be scheduled the same day. Larger jobs need an assessment and written plan first, plus drying time, so the full job takes longer.

Do you work on commercial properties?

Yes, including shops and restaurants on Rockaway Turnpike, units off Inip Drive, multifamily buildings and community spaces, with scheduling around business hours.

Which areas do your services cover?

Inwood and the Five Towns, plus nearby South Shore communities such as Far Rockaway, Atlantic Beach, Long Beach, Island Park and Valley Stream.

How do I know which service I need?

You don’t have to. Call (516) 823-2123, describe what you’re seeing and where, and we’ll tell you which service fits, or whether it’s something you can handle yourself.

Tell Us What You’re Seeing. We’ll Match You to the Right Service.

One short call is usually enough to know whether you need remediation, water damage help, an assessment, or just a good cleaning plan for a small spot.

Every day materials stay wet, mold can spread deeper into drywall, insulation and framing.

Call 24/7, day or night

(516) 823-2123

447 Doughty Blvd, Inwood, NY 11096 · Contact@moldremovalininwood.com

Call (516) 823-2123Call 24/7
Emergency help available